Towel General Properties;
The building also participated in the towel heaters used in a short time with the family and the advantages it has to offer has become an important place for itself in the market. This is because the radiator heat spreader, decorative accessories armchairs and sofas has become the most beautiful parts of our room by removing the rear. Besides displaying a beautiful image, the functionality can be manufactured by our principal items to be dried form has also increased.
In colors decoration in the building are produced in different colors are available. Electro-static paint color fading over time is used is not the case. It can be supplied as chrome plated. Chrome-plated radiator of the same dimensions, gives approximately 30% less heat than electro-static coating. This is due to the high difference in electrostatic paint products should be preferred.
Towel Production Specifications;
Production Specifications Towel Towel is functionality while increasing the thermal efficiency of providing a product that is designed to remain in the desired value.
Steel profiles are turned into products combined with welding methods with each other. Towel design process those resources before the circulation pipe (horizontal pipes) ends are machined, seamless vertical pipe horizontal pipe and this enables you to move fully. Only quality problems are eliminated with the method applied in the design. At the same time it is turning around after opening the holes in the vertical pipe. In this way it is obtained a wider section and a welding voltage with no load. Welding quality is tested by individual air pressure of 10 bar. Design towel products from the oxidation of oxygen in the water and protected from corrosion by coating galvanizing effect.
Other manufacturers are making the surface cleaning process sanding method. In this method, sand is sprayed at high pressure to the product, the unevenness of the material surface causes a thinning of the material and does not provide any protection against corrosion. Following this procedure the electrostatic painting painted in desired colors. The present method with high quality, fading, peeling of the products obtained.
Chrome plated products in the copper surface is first, and then are coated in nickel and finally chrome. This intermediate coating with high adhesion and peeling, the swelling product is obtained.
Towel those Advantages;
» The energy savings that can be transferred with less water in the same amount of energy.
» Application provides ease of installation due to the position.
» Operating pressure tested at 10 bar, but the bar was 8.
» Easily cleaned.
» Are painted with electrostatic powder coating technique.
» Can be presented as covered in chrome.
» Millennium radiator is welded design is more durable and of high quality.
Frequently Asked Questions About the Towel;
1. Towel is made of what material? Havlupan the raw material of galvanized steel.
2- What is the advantage of Towel implications for heat transfer?
Towel because surfaced with decorative feature wall behind the seats appear to conventional radiators according to radiate heat more efficiently. There are no fins on the structure and consist exclusively of pipe. piping emit heat convection and radiation method. Pipes heat transfer rate of conventional they are open to media it is higher than the product. The heat wave spread and release the energy to hit the surface. This is why instead of air it heats the body. The objective of the design is Havlupan before hanging objects on medium heat and then it is ideally suited.
3- What is the operating pressure? Maximum operating pressure is 8 bars.
4- What is the test pressure? Test pressure is 10 bar.
5- What is the standard number of the product is appropriate? TS EN 442 standard number of products.
6. Towel Is being colored? How is it dyed? Towel radiators can be produced in any color with electrostatic powder coating method.
7. How long is the warranty period? Product warranty period is 5 years.